How to Make Wood Floors Look New Again

Wooden floors are among the best that you can have in your home. Apart from insulating your home, they also look great when polished. Unfortunately, wooden floors wear out with time due to exposure to foot traffic. Even in cases where there is much foot traffic, stains can also make them look ugly, and lose their original appeal.

As a homeowner, restoring the shine of your wooden floor means you get to enjoy the new look of your wooden floor. Moreover, it increases the value of your home. With that in mind, let us look at how to make wood floors look new again. If you live in Perth, you may choose to either do it yourself, or hire a floor sanding Perth service provider. Choosing a professional is advantageous because they will do a better job, thanks to their training and experience.

Here are five steps on how to make woods floors look new again.

Step 1. Know Your Floor Type

If you are going to do it yourself, you need to find out the type of wood used in your flooring. One of the ways to find out your floor type is to place a few drops of water on a small section of the floor. If the water forms beads, then some extra shining will restore it without causing any damage. On the other hand, if it gets absorbed and turns the wood dark, then it will need professional care.

In case your floor is laminated, you will not have to do as much work as you would with genuine hardwood flooring. Laminated floors generally require a lot less work to maintain their shine. Mostly to restore their inbuilt shine, all you have to do is clean them with soap and water, and you are done.

For hardwood floors, the first thing you can try to do is use wax products with a quality broom on them. If that does not work, the next option is to use custom refinishing. To find out if the polish will work, choose an isolated section of the floor and apply some wax. If the wax dries nicely without peeling or occurrence of adhesion problems, it means you may safely use it on the rest of the surface.

Step 2. Clean the Floor


You will need to clean any stain on your wooden floor using soap, warm water, and a soft piece of cloth. After removing any stains, the next step is to clean the entire floor using a mop, broom, or vacuum cleaner. The floor should dry completely before you move to the next step, which is screening.

Step 3. Screen the Floor


To screen the floor, you will need to use either a pole sander or a rotary floor buffer. The screening will remove the thin top surface, and leave a dull but even finish. The exposed surface will ease the reapplication process by making appear even across the whole surface.

Step Step 4. Re-Vacuum the Floor


Once you finish screening, you will have to re-vacuum the floor to remove the dust and grit the screening produced. Next, clean the floor with warm water and a rag and leave it to dry completely.

Step 5. Apply Coat of Finish


Finally, apply the desired coat of finish using the right brush, and make sure you apply it nicely around corners and edges. Follow the wood’s grain when applying, and the use a foam pad applicator to apply the finish on the rest of the surface.

That is how you restore the shine of your wooden floor. You may also contact flooring professionals to help you restore your wooden floor. We recommend that if you plan to increase the value of your home by restoring your wooden floor, then you should hire a professional. That way, you will not only get value for your money and time, but also a guarantee of the work done. We hope that you found this guide to be informative, and you will enjoy the new look of your floor.

Similar Posts